- HOME
- CITROEN VAN ROOF RACKS
- DAIHATSU VAN ROOF RACKS
- FIAT VAN ROOF RACKS
- FORD VAN ROOF RACKS
- IVECO VAN ROOF RACKS
- LDV VAN ROOF RACKS
- MERCEDES VAN ROOF RACKS
- NISSAN VAN ROOF RACKS
- PEUGEOT VAN ROOF RACKS
- RENAULT VAN ROOF RACKS
- SEAT VAN ROOF RACKS
- SUZUKI VAN ROOF RACKS
- TOYOTA VAN ROOF RACKS
- VAUXHALL VAN ROOF RACKS
- VW VAN ROOF RACKS
- MORE PRODUCTS
Van-roof-racks.com is owned by Proppa Cars Ltd
Proppa stock a huge range of van roof racks, roof baskets, ladder steps, roof platforms, pipe carriers, ladder stops and roller kits. Here are some of the products available for an LDV van.
LDV Van Roof Racks
We stock a huge range of LDV van roof racks. These are available for the following vans:
- LDV CONVOY
- LDV MAXUS
- LDV PILOT
LDV Van Roof Racks - Front load Stops (Pair)
Adjustable Front Load Stops.
A very usefull addition to any roof rack to stop loads such as sheets of material from slipping forward under braking.
They simply clip on to the front bars in any position, and can easily be removed when not required.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - 2 Bar Heavy Duty Stainless Steel
These roof bars are made from 50mmx30mmx1.5mm Stainless Steel for many
years of corrosion resistance.
They are extra wide for carrying 4'wide sheets.
They also have 4 adjustable ladder stops.
The other parts are made from 3mm thick pre galvanized steel then powdercoated black , and will also last for many years.
All fixings and fitting instructions are supplied.
No drilling of the roof will be required when fitting this product.
Approximate fitting time 30 mins.
Maximum load 45 kgs per bar.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Heavy Duty Stainless Steel (8X4 Capacity) Roof Rack Includes Full Width Stainless Steel Roller For T
This is One Of Our Best Selling Roof Racks.
All the cross and side bars are made from 50mmx30mm x1.5mm Stainless Steel for life long corrosion resistance, all other parts are made from pre galvanized steel and then polyester powdercoated.
The roller on the rear bar is full width and runs in nylon bearings for a smooth rotation.
Our new front load stops (KFLS) can be fitted to this rack to stop loads from slipping forward under braking.
Full fitting instructions & Fixings are supplied.
No drilling of the roof will be required when fitting this product.
Fitting time approx 90 mins.
Maximum load 125 kgs
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Ladder Slides with Roller
Ladder Slide attachments for easy ladder loading and securing.
Made of aluminium angle complete with stainless steel roller on nylon bearings.
Available in 2, 2.5 and 3 metre lengths.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Roof Basket
These roof basket modules are very popular for carrying odd shaped items
that would normally be difficult to fix to a roof rack.
Made from high quality 16g pre galvanized steel. These come in modules
of 1.29m wide x 1m long.
The modules can be bolted together to make up any length you require
ie 1-4 metres long.
Example a Ford Connect or Vauxhall Combo would take one or two modules
whilst a Ford Transit may take three or four depending on wheel base.
These are designed for Van Guard roof racks but may fit other makes.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Roller Kit
This stainless steel full width roller is mounted on pre galvaized steel
brackets attached to the rear bar.The roller is running in nylon bearings
for a smooth rotation.
They will come with the correct roller length for your roof bars, If ordered at the same time.
All fittings are included.
Fitting time approximatly 20 mins.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Rear Door Ladders 6 steps
Rear door ladders are made from galvanised steel and then polyester coated
in black for maximum corrosion resistence.
They have aluminium anti-slip tread plate rungs and are designed to fit tot he offside rear door of most vans. Also available with lockable anti-climb cover.
A must have to allow esay access to the roof of your van, make loading and unloading from either a roof rack or basket easy.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Roof Platform
The 'Roof Platform' or 'Crawl Board' is constructed from 18mm Phenol Impregnated
Birch Plywood, with a heavy duty Mesh pattern finish to the face side.
This mesh pattern provides some anti-slip properties and the phenol impregnation provides full weatherproofing.
The face edges are protected by an aluminium edging strip to all four sides. Utilising the fixings supplied, the 'Platform' can be easily drilled to fit any roof racks.
If using this platform on vehicles over 2m in height, you should ensure that all applicable working height regulations are complied with.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Pipe Carriers (Include Padlocks)
Anodised Aluminium pipe carriers are available in 100mm or 150mm diametres
and in 2 or 3 metre lengths. Each pipe has two lockable aluminium cast
end caps and is supplied with brackets and fixings. To suit most vehicles.
(2 padlocks supplied).
Longer lengths are available on request. Please call if Longer lengths are needed.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Ladder Stops, Heavy Duty
These add on ladder stops are very usefull for containing ladders or pipes
from sliding sideways when cornering.
Once again made from high quality pre galvanized steel and black powdercoated for many years of corrosion resistance.
Quick release handles are provided for fast adjustment or removal.
Ladder stops are sold in pairs and will fit any Van Guard roof rack cross
bars.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - 8x4 Bar Heavy Duty Stainless Steel with Roller Kit
This is our best selling roof rack a very strong roof rack with roller.
All the cross and side bars are made from 50mmx30mm x1.5mm Stainless Steel for life long corrosion resistance, all other parts are made from pre galvanized steel and then polyester powdercoated.
The roller on the rear bar is full width and runs in nylon bearings for a smooth rotation.
Full fitting instructions & Fixings are supplied.
Approximate fitting time 90 mins.
Maximum load 125 kgs.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.
LDV Van Roof Racks - Roller Kit Full Width Stainless Steel
This stainless steel full width roller is mounted on pre galvaized steel
channels attached to the rear and middle roof brackets to provide maximum
ridgidity.The channels are slotted to provide some adjustment of the roller
position.The roller is running in nylon bearings for a smooth rotation.
All fittings are included.
Fitting time approximatly 20 mins.
To check out our prices for LDV van roof racks click here - this takes you to our secure online shop.